SikaCoat-333
SikaCoat-333 is an elastic, self-priming, acrylic-based liquid-applied membrane with solar-reflective properties that reduce heat absorption, helping to lower building temperatures and improve energy efficiency.
- High UV resistance and solar reflectivity for energy efficiency
- Eco-friendly, water-based, and non-toxic
- Bridges micro cracks and bonds well to various substrates
- Elastic waterproofing with superior coverage
- Easy application by roller, brush, or spray.
Usage
Waterproofing applications:- Flat and sloping fully exposed roof structures
- New construction and refurbishment projects
- External walls
- Roofs with numerous details such as penetrations, drains, roof lights and complex geometry
- Concrete, mortar, and cementitious substrates.
- Brick and roof tiles
- Metal surfaces (steel, zinc, aluminum)
Advantages
- High UV resistance and solar reflectivity for energy efficiency
- Eco-friendly, water-based, and non-toxic
- Bridges micro cracks and bonds well to various substrates
- Elastic waterproofing with superior coverage
- Easy application by roller, brush, or spray.
Packaging
- 4 kg pail
- 20 kg pail
Colour
- White
- Grey
- Also available in other colours upon request. (Subject to minimum order quantity)
Product Details
CERTIFICATES AND TEST REPORTS
- Singapore Green Label: 032-118-4436 "Environmentally Preferred Paints & Surface Coatings"
Composition
Watery emulsion using styrene-acrylic copolymers
Shelf Life
12 months from date of production
Storage Conditions
Store properly in original, unopened, undamaged sealed packaging in dry condition at temperature between +5 °C and +30 °C. Protect from direct sunlight.
Density
~1.25 kg/l
Viscosity
~29,000 cps
Tensile Strength
| ~2 MPa | (ASTM D412) |
Elongation at break
| ~300 % | (ASTM D412) |
Application
Ambient Air Temperature
+5 °C min. / +35 °C max.
Substrate Temperature
+5 °C min. / +35 °C max.
Substrate Moisture Content
< 4 % pbw
Test method: Sika®-Tramex meter, CM-measurement or oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet)
Waiting Time / Overcoating
| Minimum | 2–3 hours at +25 °C |
| Maximum | ~24 hours at +25 °C |
Applied Product Ready for Use
~72 hours at +25 °C
Consumption
For wall
| Primer | SikaCoat-333 diluted with 15–20 % clean water | 0.3 kg/m² (Undiluted) |
| First coat | SikaCoat-333 | 0.35 kg/m² |
| Second coat | SikaCoat-333 | 0.35 kg/m² |
For roof
| Primer | SikaCoat-333 diluted with 15–20 % clean water | 0.3 kg/m² (Undiluted) |
| Top coat | SikaCoat-333 | 0.6 kg/m² |
| Second coat | SikaCoat-333 | 0.6 kg/m² |
The consumption above are approximates and does not include wastages. For porous substrates, the consumption may be higher.
SUBSTRATE PREPARATION
Substrates must be free of standing water (no puddles) clean and free of all contaminants such as dirt, oil, grease, coatings, laitance, surface treat-ments and loose friable material.
All existing coating / membrane, dust, loose and friable material must be completely removed from all surfaces before application of SikaCoat-333, and associated system products, by industrial vacuuming equipment.
The substrate must be sound and of sufficient strength. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed.
To confirm adequate surface preparation and product adhesion, carry out a trial before full application to-gether with adhesion tests.
MIXING
Mix SikaCoat-333 (manually or with a low-revolution mixer) until it is completely homogeneous.
APPLICATION
Dilute SikaCoat-333 with 15–20 % of clean water. Stir gently until the mix is homogenous and a uniform colour is achieved. Using a short hair wool roller, brush or by airless spray, apply a layer of the diluted SikaCoat-333 onto the substrate, observing that it penetrates well in all the cracks.
After the primer has dried (> 3 hours at +30 °C), apply successive layers of SikaCoat-333 to the desired film thickness. Ensure the previous layer is completely dry before applying the next layer.
CLEANING OF TOOLS
Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically.
FAQ
Roof reflectivity reduces heat inside a building by reflecting solar radiation away from the roof surface rather than absorbing it as heat. Sika Malaysia cool roof coatings reflect over 65 % of the sun's rays, compared to conventional roofs which repel less than 15 %.
Products such as SikaCoat-333, SikaCoat-500 Super and SikaCoat-555 have high solar reflectance and reduce heat absorption, helping lower building temperatures and improve energy efficiency. This reduces heat transferred into the building interior, lessening the load on air conditioning. The result is improved thermal comfort and lower energy consumption, demonstrating the value of heat reflective paint for roof.
Applying a cool roof coating to an existing roof involves surface preparation, priming if required, and application by brush, roller or spray. For Sikalastic®-590, clean the roof surface and apply the roof coating to achieve the recommended dry film thickness.
SikaCoat-333 is self-priming, simplifying cool coat sika application on concrete, metal and other substrates. SikaCoat-500 Super & SikaCoat-555 can be applied directly by brush, roller or spray. Ensure the roof is dry and free from contaminants before applying heat reflective paint for roof. Apply evenly and allow adequate curing between coats, following Sika Malaysia application instructions.
Sika Malaysia offers cool roof coating products suitable for metal roofs. SikaCoat-333 is a styrene-acrylic roof coating ideal for concrete roofs, metal roofs and exterior surfaces, providing high solar reflectivity in white.
SikaCoat-500 Super & SikaCoat-555 are another suitable cool coat sika option, based on styrene-acrylic copolymers with integral micro-fibre reinforcement, suitable for roof restoration projects on metal, and concrete. SikaCoat-333 also bonds well to metal and provides reflective coating roof performance. Proper surface preparation ensures adhesion to metal roof surfaces.
Choosing the right cool roof coating depends on your roof substrate, building type and performance requirements. For concrete roofs, Sikalastic®-590 is a one-component polyurethane-acrylic dispersion with good crack-bridging capacity and reflective coating roof properties.
SikaCoat-333 suits various substrates including concrete, metal and brickwork, providing heat reflective paint for roof performance. For enhanced tensile strength, SikaCoat-500 Super & SikaCoat-555 features integral micro-fibre reinforcement. Consider roof slope, exposure and whether the roof coating is for new construction or roof restoration. Sika Malaysia provides technical support for correct cool roof system selection.
A cool roof system offers several benefits for buildings in Malaysia's tropical climate. It reduces mechanical air conditioning needs, lowering energy costs and improving efficiency. The reflective coating roof surface minimises heat gain inside the building, enhancing occupant comfort.
Sika Malaysia cool roof coatings, including SikaCoat-333, SikaCoat-500 Super and SikaCoat-555, help mitigate the urban heat island effect. They extend roof lifespan by reducing thermal stress. The roof waterproofing properties also protect against water ingress and weather damage. These roof solutions ensure durability and support cool roof technology adoption for sustainable buildings.
A cool roof coating is a reflective roof coating applied to reduce heat absorption and lower building temperatures. Sika Malaysia offers cool coat sika products such as SikaCoat-333, an elastic, self-priming acrylic membrane with solar-reflective properties.
These heat reflective paint for roof systems work by reflecting over 65 % of the sun's rays, compared to conventional roofs that repel less than 15 %. The reflective coating roof layer minimises heat gain, improving comfort and reducing air conditioning reliance. They also provide roof waterproofing and protect against weather damage.