Show all documents

Sika® InjectoCem-190

Sika InjectoCem-190 is a 2-part micro cement injection suspension (d95 < 9.5 µm) with integrated corrosion inhibitors.

  • Structural grouting of cracks
  • Corrosion protection of reinforcement
  • Deep penetration of narrow cracks in concrete and mortar
  • Good flow properties
Show all documents

Usage

Sika InjectoCem-190 is used for:

  • Pre-sealing work
  • Filling of voids
  • Final, rigid cementitious sealing of cracks

Sika InjectoCem-190 is used for simultaneous treatment of corroded reinforcement or reinforcement under threat of corrosion in concrete and mortar. Sika InjectoCem-190 is suitable for use with Sika Injectoflex-System. With Sika InjectoCem-190 cracks with a width of > 0.2 mm can be grouted.

Advantages

  • Structural grouting of cracks
  • Corrosion protection of reinforcement
  • Deep penetration of narrow cracks in concrete and mortar
  • Good flow properties

Packaging

Pre-dosed units at 8.25 kg (parts A + B) packed in plastic pails.
Part A: 2 bags of 2.5 kg powder
Part B: pail of 3.25 kg liquid

Documents