Product Data Sheet
Show all documents
SikaWall®-192 Finish

SikaWall®-192 Finish

High performance, cementitious finish skimcoat for internal wall

Formally known as Brefill® Fine. SikaWall®-192 Finish is a one component cementitious fine finishing coat for skimming on wall and ceilings. It's smooth finishing and good adhesion is suitable for internal application.

  • Provide a good fine surface finish on walls, ceilings, etc.
  • Greater durability and flexibility
  • Quick drying and easy to apply
  • Thickness of the plaster can be varied to minimise wastage
  • Non-combustible
  • Non-cracking when applied at correct thickness and properly cured
  • Easy to mix – just add water
  • Good adhesion
  • Can be applied by spraying
Product Data Sheet
Show all documents

Usage

SikaWall®-192 Finish is a fast and economical way to patch fine surface imperfections such as pinholes and hairline cracks.  

Advantages

  • Provide a good fine surface finish on walls, ceilings, etc.
  • Greater durability and flexibility
  • Quick drying and easy to apply
  • Thickness of the plaster can be varied to minimise wastage
  • Non-combustible
  • Non-cracking when applied at correct thickness and properly cured
  • Easy to mix – just add water
  • Good adhesion
  • Can be applied by spraying

Packaging

25 kg bag

Colour

  • Grey powder
  • White powder

Product Details

Product Information

Composition

Cementitious mortar

Shelf Life

6 months from the date of production

Storage Conditions

Store properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Protect from direct sunlight, rain and water.

Density

1.00–1.20 kg/l

Maximum Grain Size

0.4 mm
Technical Information

Tensile Adhesion Strength

SikaWall®-192 Finish Grey

≥ 0.3 N/mm²

Adhesion fracture

SikaWall®-192 Finish White

≥ 0.3 N/mm²

Adhesion fracture

Application

Application Information

Mixing Ratio

12 L water per 25 kg bag

Fresh Mortar Density

1.60–1.68 kg/l

Layer Thickness

0.7–2.0 mm
Consumption

Consumption

1.1–1.2 kg/m²/mm

* Dry powder
* This may only serve as a guideline. It is highly recommended to carry-out trials on site to determine the actual coverage.
Application steps

MIXING

SikaWall®-192 Finish must be mixed with clean water at the site using a power drill whisk. Pour the required water into a suitable container then add SikaWall®-192 Finish while stirring continuously until a smooth consistency is achieved. Allow mixture to stand for a few minutes. Mix again and the plaster is ready for use.

 

APPLICATION

SikaWall®-192 Finish is applied either by hand with a steel trowel or spatula. The coat is then levelled off to a smooth surface with a steel trowel. Ensure that the applied coat has hardened before application of subsequent coats.

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use. Hardened or cured material can only be removed mechanically.

Documents

FAQ

What are skim coats?

Skim coats are fine mortars applied onto walls and ceilings to a thickness of 2–3 mm to create a flat, smooth and uniform surface, to be painted or re-textured. As a guide, you should apply at least two skim coat layers to achieve a smooth and consistent surface.

Sika’s Product: