Sikafloor® MultiCoat AB-11
Water-based epoxy-acrylic resin floor system for asphalt substrates
Sikafloor® MultiCoat AB-11 is a coloured, water-based, epoxy-acrylic resin floor system for asphalt substrates. It provides a seamless, slip-resistant semi-gloss finish for sports flooring, demarcation areas and areas exposed to light wheeled traffic. The System is based on Sika® Co-elastic Technology (CET).
- Easy to apply
- Decorative design
- Good resistance to light wheeled traffic
- Available in many colours
- Good resistance to the occasional spillage of hydrocarbons
- Can be filled with quartz sand to improve economy
- Good slip resistance
System Structure
Usage
Sikafloor® MultiCoat AB-11 is used on:- Sport facilities and gymnasiums
- Pedestrian and cycling bridges
- Walkways
- The Product may only be used by experienced professionals.
Advantages
- Easy to apply
- Decorative design
- Good resistance to light wheeled traffic
- Available in many colours
- Good resistance to the occasional spillage of hydrocarbons
- Can be filled with quartz sand to improve economy
- Good slip resistance
Colour
| Cured system colour | white (~RAL-9010), signal red (~RAL-3001), black (~RAL-9011), yellow (~RAL-1003), oxide red (~RAL-3009), moss green (~RAL-6005), albero (~RAL-1034), light green (~RAL-6027), mint green (~RAL-6029), light blue (~RAL-5012), dark grey (~RAL-7024), platinum grey (~RAL-7036), cobalt blue (~RAL-5013), dark blue (~RAL-5010), cement grey (~RAL-7032), brown (~RAL-8002), beige (~RAL-1001), pink (~RAL-3014), ivory (~RAL-1014) |
Appearance
| Cured system appearance | Slip-resistant semi-gloss finish |
System Details
System Structure
Sikafloor® MultiCoat AB-11
| Layer | Product | |
| 1. | Primer | Sikafloor®-2040 |
| 2. | Wearing layer | Sikafloor®-2100 |
| 3. | Top coat | Sikafloor®-2100 |
Composition
Epoxy acrylic technology
Nominal Thickness
2.0 mm to 3.0 mm
Tensile Adhesion Strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
| Class Bfl-s1 | (EN 13501-1) |
Application
Ambient Air Temperature
| Maximum | +30 °C |
| Minimum | +10 °C |
Relative Air Humidity
| Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
| Maximum | +30 °C |
| Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
Before applying Sikafloor®-2100 on Sikafloor®-2040, allow:
Temperature | Minimum | Maximum |
+10 °C | 12 hours | 72 hours |
+20 °C | 6 hours | 48 hours |
+30 °C | 4 hours | 24 hours |
Before applying Sikafloor®-2100 on Sikafloor®-2100, allow:
Temperature | Minimum | Maximum |
+10 °C | 10 hours | 6 days |
+20 °C | 5 hours | 3 days |
+30 °C | 3 hours | 36 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | 16 hours | 4 days | 7 days |
+20 °C | 8 hours | 2 days | 3 days |
+30 °C | 4 hours | 1 day | 36 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
Layer | Product | Consumption |
Primer | Sikafloor®-2040 | 1 × 0.8–1.0 kg/m² |
Wearing layer | Sikafloor®-2100 (filled 1:1 with Quartz Sand 0.1–0.3 mm) | 2 × 0.8 kg/m² per layer |
Top coat | Sikafloor®-2100 | 1 × 0.3–0.4 kg/m² |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.