Product Data Sheet Show all documents

Davco Ceramic Tile Cleaner 800

Tile, grout and masonry cleaner

Davco Ceramic Tile Cleaner 800 is general purpose cleaner designed for routine maintenance of showers, bathrooms and other tile / stone / masonry installations. It safely and easily removes mold and mildew, as well as mineral deposits, hardwater and rust stains.

  • Easy to use
  • Fast acting
  • Safe and economical
Product Data Sheet Show all documents

Usage

Davco Ceramic Tile Cleaner 800 is ideal for stripping grout haze, cement / mortars smears and efflorescence from new and renovated construction. It is suitable for interior or exterior use over vertical or horizontal surfaces. Davco Ceramic Tile Cleaner 800 concentrate provides extra strength for industrial / institutional demand and dilutes with water.   Area to use:
  • Ceramic tile and mosaic
  • Glass block, glass shower door
  • Unpolished marble and granite
  • Concrete block
  • Grout joint
  • Vanity, counter top, tub, shower
  • Brick and masonry
  • Metal fixture
  • Concrete
  • Fiberglass

Advantages

  • Easy to use
  • Fast acting
  • Safe and economical

Packaging

1 L, 4 L, 20 L

Product Details

Product Information

Shelf life

12 months from date of production

Storage conditions

Store properly in original, unopened and undamaged packaging in dry conditions. Protect from direct sunlight.

Density

~1.16 kg/l

pH-Value

2.00 - 3.00

Application

Consumption

Consumption

Application

Davco Ceramic Tile Cleaner 800 : water (by volume)

Normal cleaning

1 : 3

Unpolished marble / limestone

1 : 3

Granite, brick or masonry concrete

1 : 2

Heavy soil, stains, mineral deposits

1 : 1

Mold / mildew removal

1 : 1

Approximate coverage at recommended dilution ratio:

Davco Ceramic Tile Cleaner 800

1:1

1:2

1:3

4 L

112 m²

168 m²

224 m²

20 L

558 m²

836 m²

1 116 m²

Actual coverage will vary depending site conditions, type of surface, cleaning methods and spillage / wastage.
Application steps

MIXING

Pour Davco Ceramic Tile Cleaner 800 into a clean plastic pail or mixing container. Measure approximately the volume of water needed. Add water and stir for a minute or until uniform.

SUBSTRATE PREPARATION

Before starting application, always use a small test area to verify compatibility and results in an inconspicuous area, put 2–3 drops of Davco Ceramic Tile Cleaner 800 on the surface with clean water and let dry.

 

Examine surface for discoloration / shadding, staining, dulling, etching or other problems. If results are satisfactory, proceed with preparation by vacuuming or brooming all areas to remove loose dirt and debris, saturate grout joints, cement plasters / stucco and porous tile / stone with clean water before starting the application.

APPLICATION

Apply over surface to be cleaned with pump spray, sponge, brush, mop, roller or rag. Use stiff brush, broom or scrub pad to clean rough / badly soiled surfaces, satins or cement smears. Flush or mop twice with clean water. Change mop water frequently. Use broom, squeegee, wet vacuum, mop or sponge to remove rinse water. Repeat steps for stubborn stains, heavy soil or old / thick cement smears.

CLEANING OF EQUIPMENT

Rinse/clean all tools and equipment with lots of water.

Documents