Product Data Sheet
Show all documents

Davco Impregnator 21 WB

Water based clear sealer with deep penetrating ability

Davco Impregnator 21 WB is a water based impregnator liquid, formulated to provide both water repellency and oil repellency with its deep penetrating ability. It helps to preserve the original beauty of stone, brick, mansory, plaster, concrete, and etc.

  • Excellent water and oil repellency
  • Stain resistance to common household stain
  • Easy to clean properties
  • Allows an architectural structure to breathe
  • Low VOC
Product Data Sheet
Show all documents

Usage

  • Floor made of natural or synthetic stone and of polished ceramic tiles
  • All kinds of concrete
  • Aerated plasters
  • Fibre cement boards
  • Sand-lime brickwork
  • Brickwork
  • Mineral paints
  • Mineral based natural and artificial stone
 

Advantages

  • Excellent water and oil repellency
  • Stain resistance to common household stain
  • Easy to clean properties
  • Allows an architectural structure to breathe
  • Low VOC

Packaging

20 L

Product Details

Product Information

Shelf life

12 months frrom date of production

Storage conditions

Store properly in original, unopened and undamaged packaging in cool, dry conditions.

Application

Application Information

Waiting time to overcoating

30–60 minutes

Applied product ready for use

~24 hours
Consumption

Consumption

~9–12 m²/l for 2 coats on granite and marble depending on surface porosity and roughness
Application steps

MIXING

Do not shake, stir slowly. Avoid whipping air into Davco Impregnator 21 WB.

APPLICATION

Apply Davco Impregnator 21 WB directly from the can using a roller, brush or suitable spray equipment. Soaking method may be adopted for certain type of stone. When applying by brush or roller, a minimum 2 coats is recommended to ensure a continuous film. Allow 30 minutes to 1 hour drying in between coats. When spraying, use a low pressure spray equipment. Wear goggles and mask/respirator as protection. For best result allow approx. 3 days for curing.

It is user’s responsibility to ensure suitability of a sealer before actual application as the characteristics of stone may differ from different origin.

CLEANING OF EQUIPMENT

After application clean all tools with water

 

Documents