Sikafloor® MultiCoat AB-10
Epoxy acrylic water based resin floor system for concrete substrates
Sikafloor® MultiCoat AB-10 is an epoxy acrylic coloured water based resin floor system based on co-elastic technology for concrete and cementitious substrates. The system provides a seamless, smooth semi-gloss finish for surfaces that are suitable for sports flooring, demarcation areas and light wheeled traffic exposure.Varying thickness’s can be achieved from 2,0–3,0 mm. Internal and external use.
- Easy application
- Good UV Resistance
- Good aesthetic finish
- Resistant to light wheeled traffic
- Good flexibility
- Available in many colours
- Resistant to occasional hydrocarbon spillages
- Can be filled with quartz sand to varying thickness’s and cost savings
System Structure
Usage
- Multi-purpose sports flooring surface
- Coating for bicycle and pedestrian lanes in parks and recreational areas
- Coating for pedestrian areas, sidewalks, house accesses, etc.
Advantages
- Easy application
- Good UV Resistance
- Good aesthetic finish
- Resistant to light wheeled traffic
- Good flexibility
- Available in many colours
- Resistant to occasional hydrocarbon spillages
- Can be filled with quartz sand to varying thickness’s and cost savings
Packaging
Refer to the individual Product Data Sheets
Colour
Available colours: grey (~RAL 7015), white, black, yellow (~RAL 1003), sand, oxide red (~RAL 3011), signal red (~RAL 3020), moss green (~RAL 6020), light green (~RAL 6021), mint green (~RAL 6018), cobalt blue (~RAL 5013), light blue (~RAL 5015), navy blue (~RAL 5010), platinum grey (~RAL 7036), cement grey (~RAL 7032), dark grey (~RAL 7015), beige (~RAL 1001), brown (~RAL 8002), ivory (~RAL 1015).
For better opacity of the colours signal red, mint green and yellow, apply another layer of the top coat.
Appearance
Smooth semi-gloss finish
System Details
System Structure
Sikafloor® MultiCoat AB-10 (~2–3 mm)
| Layer | Product |
| 1. Primer | Sikafloor®-154 W |
| 2. Wearing coat | Sikafloor®-2100 |
| 3. Top coat | Sikafloor®-2100 |
Composition
Water-based epoxy acrylic resin
Nominal Thickness
~2–3mm
Shelf Life
Refer to the individual Product Data Sheets
Storage Conditions
Refer to the individual Product Data Sheets
Shore D Hardness
~64
Abrasion Resistance
110 mg (Taber abrasion test)
Tensile Strength
| ~2.7 MPa | (EN ISO 527-1/2) |
Tensile Adhesion Strength
| ≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
| Bfl-S1 | (EN 13501-1) |
Permeability to Water Vapour
| ~0.005 kg/m2 h0.5 | (EN 1062-3) |
Application
Product Temperature
Refer to individual Product Data Sheets
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % maximum (also refer to limitations in Sikafloor®-2100 Product Data Sheet)
Dew Point
Beware of condensation
The substrate and uncured applied floor material must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
< 4 % parts by weight. Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-2100 on Sikafloor®-154 W allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 12 hours | 72 hours |
| +20 °C | 6 hours | 48 hours |
| +30 °C | 4 hours | 24 hours |
Before applying Sikafloor®-2100 on Sikafloor®-2100 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 10 hours | 6 days |
| +20 °C | 5 hours | 3 days |
| +30 °C | 3 hours | 1.5 days |
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~16 hours | 4 days | 7 days |
| +20 °C | ~8 hours | 2 days | 3 days |
| +30 °C | ~4 hours | 1 day | 1.5 days |
Consumption
Sikafloor® MultiCoat AB-10 (~2–3 mm)
| Coating System | Product | Consumption |
| Primer | 1 × Sikafloor®-154 W | ~0.3–0.6 kg/m² |
| Wearing coat | 1 × Sikafloor®-2100 filled 1:1 with quartz sand (0.1–0.3 mm) | ~0.8 kg/m²/layer |
| Top coat | 1–2 coats × Sikafloor®-2100 | ~0.3–0.4 kg/m² |