Sikafloor® MultiDur EB-24
Sikafloor® MultiDur EB-24 is a slip resistant, coloured, epoxy covering with high mechanical resistance for flooring applications
- High wear resistance
- High mechanical resistance
- Good chemical resistance
- Easy application
- Waterproof
- Gloss finish
- Slip resistant
Usage
- for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- for multi-storey and underground car parks and for wet process areas, e.g. beverage and food industry
Advantages
- High wear resistance
- High mechanical resistance
- Good chemical resistance
- Easy application
- Waterproof
- Gloss finish
- Slip resistant
Packaging
Please refer to the individual Product Data Sheet
Colour
Available in various colour shades.
Appearance
Slip resistant, gloss finish
System Details
System Structure
Sikafloor® MultiDur EB-24 system (~ 2–4 mm)
1. Primer | Sikafloor®-161 HC |
2. Wearing coat & broadcast in excess | Sikafloor®-263 SL HC or Sikafloor®-264 HC broadcast with quartz sand in excess |
2. Top coat | Sikafloor®-264 HC |
Composition
Epoxy
Nominal Thickness
~2.0–4.0 mm
Shelf Life
Please refer to the individual Product Data Sheet
Storage Conditions
Please refer to the individual Product Data Sheet
Chemical Resistance
Refer to the chemical resistance of Sikafloor®-264 HC
Temperature Resistance
Exposure* | Dry heat |
Permanent | +50 °C |
Short-term max. 7 d | +80 °C |
Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.
Application
Product Temperature
Please refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10°C min. / +30°C max.
Substrate Moisture Content
When performing application work with Sikafloor® MultiDur EB-24, the substrate moisture content must not exceed 4 % pbw measured by Tramex.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-263 SL HC/-264 HC on Sikafloor®-161 HC allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 24 hours | 3 days |
+20 °C | 12 hours | 2 days |
+30 °C | 8 hours | 1 day |
Before applying Sikafloor®-264 HC on Sikafloor®-263 SL HC/-264 HC allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 30 hours | 48 hours |
+20 °C | 24 hours | 24 hours |
+30 °C | 16 hours | 30 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
+20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
+30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur EB-24 system (~ 2–4mm)
Coating System | Product | Consumption |
Primer | 1–2 x Sikafloor®-161 HC | ~ 0.3–0.5 kg/m² |
Wearing coat | Sikafloor®-263 SL HC or Sikafloor®-264 HC filled 1:1 with quartz sand 0.1–0.3mm (Sikadur® 508) | ~ 4 kg /m2 ( 2 kg/m² binder + 2 kg/m² quartz sand) |
Broadcast in excess | quartz sand 0.3–0.9 mm (Sikadur® 501) | ~ 4–6 kg/m² |
Top coat | 1–2 × Sikafloor®-264 HC | ~0.6–0.8 kg/m² |
CLEANING
Please refer to the Method Statement Sikafloor®‐ Cleaning Regime