Sikafloor® MultiDur EB-14
Sikafloor® MultiDur EB-14 is a slip resistant, coloured, rigid flooring system based on epoxy resins
- Good chemical and mechanical resistance
- Easy application
- Liquid proof
- Gloss finish
- Easy cleanability
Usage
- For concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- For multi-storey and underground car parks and for wet process areas, e.g. beverage and food industry
Advantages
- Good chemical and mechanical resistance
- Easy application
- Liquid proof
- Gloss finish
- Easy cleanability
Packaging
Please refer to the individual Product Data Sheet
Colour
Available in various colour shades.
Appearance
Slip resistant, gloss finish
System Details
Shelf Life
Please refer to the individual Product Data Sheet
Storage Conditions
Please refer to the individual Product Data Sheet
System Structure
Sikafloor® MultiDur EB-14 system (~ 2–3 mm)
| 1. Scratch coat & broadcast | Sikafloor®-161 HC & broadcast with quartz sand 0.3–0.9 mm |
| 2. Wearing coat | Sikafloor®-264 HC |
Composition
Epoxy
Nominal Thickness
~2.0–3.0 mm
Chemical Resistance
Please refer to the chemical resistance chart of Sikafloor®-264 HC
Temperature Resistance
| Exposure* | Dry heat |
| Permanent | +50 °C |
| Short-term max. 7 d | +80 °C |
| Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.
Application
Product Temperature
Please refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
When performing application work with Sikafloor® MultiDur EB-14, the substrate moisture content must not exceed 4 % pbw measured by Tramex.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-264 HC on Sikafloor®-161 HC allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 24 hours | 3 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Before applying Sikafloor®-264 HC on Sikafloor®-264 HC allow:
| Title 1Substrate temperature | Minimum | Maximum |
| +10 °C | 30 hours | 48 hours |
| +20 °C | 24 hours | 24 hours |
| +30 °C | 16 hours | 30 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
| +20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
| +30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur EB-14 system (~ 2–3 mm)
| Coating System | Product | Consumption |
| Scratch Coat | 1 × Sikafloor®-161 HC filled at 1:0.5 with quartz sand 0.1–0.3 mm | ~1.3 kg/m² |
| Broadcast in excess | Quartz sand 0.3–0.9 mm | ~4–6 kg/m² |
| Top coat | 2 × Sikafloor®-264 HC | ~0.6–0.8 kg/m² |
CLEANING
Please refer to the Method Statement Sikafloor®‐ Cleaning Regime