Sikafloor® MultiDur ET-14
Sikafloor® MultiDur ET-14 is a coloured rigid epoxy floor covering with textured properties.
- Light to medium mechanical resistance
- Medium chemical resistance
- Increased slip resistance
- Jointless
- Hygienic
- Total solid
- Gloss finish
- Easy cleanability
Usage
- for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- for multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry.
- for areas where slip resistance and easy cleanability is required
Advantages
- Light to medium mechanical resistance
- Medium chemical resistance
- Increased slip resistance
- Jointless
- Hygienic
- Total solid
- Gloss finish
- Easy cleanability
Packaging
Please refer to the individual Product Data Sheets
Colour
Almost unlimited choice of colour shades.
Appearance
Textured, gloss finish
System Details
Shelf Life
Please refer to the individual Product Data Sheets
Storage Conditions
Please refer to the individual Product Data Sheets
System Structure
Sikafloor® MultiDur ET-14
1. Primer | 1–2 × Sikafloor®-161 HC |
2. Wearing Coat | 1–2 × Sikafloor®-264 HC + Extender-T |
Composition
Epoxy
Nominal Thickness
~1.0 mm
Shore D Hardness
~76 (7 days / +23 °C) | (DIN 53 505) |
Compressive Strength
Resin : ~60 N/mm² (28 days / +23 °C) | (EN 196–1) |
Tensile Adhesion Strength
> 1.5 N/mm² (failure in concrete) | (ISO 4624) |
Reaction to Fire
Bfl-S1 | (DIN EN 13501-1) |
Chemical Resistance
Resistant to many chemicals. Please ask for a detailed chemical resistance table.
Application
Product Temperature
Please refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
When performing application work with Sikafloor® MultiDur ET-14, the substrate moisture content must not exceed 4 % pbw measured by Tramex.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®–264 HC on Sikafloor®–161 HC allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 24 hours | 3 days |
+20 °C | 12 hours | 2 days |
+30 °C | 8 hours | 1 day |
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | ~72 hours | ~6 days | ~10 days |
+20 °C | ~24 hours | ~4 days | ~7 days |
+30 °C | ~18 hours | ~2 days | ~5 days |
Consumption
Sikafloor® MultiDur ET-14 system ( ~ 1,0 mm)
Coating System | Product | Consumption |
Primer | 1–2 × Sikafloor®-161 HC | ~0.3–0.5 kg/m² |
Wearing coat | 1–2 × Sikafloor®-264 HC + 2 % pbw of Extender-T | ~0.5–0.8 kg/m² per layer |
CLEANING
Please refer to the Method Statement Sikafloor®‐ Cleaning Regime