Sikafloor® MultiDur EB-14 ECC
Sikafloor® MultiDur EB-14 ECC is an epoxy antislip system for industrial floors on damp substrates.
- High wear resistance
- Good mechanical resistance
- Good chemical resistance
- Medium thermal shock resistance
- Slip resistant
- Fast and easy application
- Thermal expansion properties similar to concrete
- Excellent bond to green or hardened concrete whether damp or dry
- Excellent early and final mechanical strengths
- Excellent resistance to water and oils
- For internal use
- Contains no solvents
- Will not corrode reinforcement steel
Usage
For industrial floors subject to medium and heavy traffic, such as warehouses, storage areas, car parks and laboratories.Advantages
- High wear resistance
- Good mechanical resistance
- Good chemical resistance
- Medium thermal shock resistance
- Slip resistant
- Fast and easy application
- Thermal expansion properties similar to concrete
- Excellent bond to green or hardened concrete whether damp or dry
- Excellent early and final mechanical strengths
- Excellent resistance to water and oils
- For internal use
- Contains no solvents
- Will not corrode reinforcement steel
Packaging
Please refer to the individual Product Data Sheet
Colour
RAL 1001, 6021, 7030, 7032, 7035, 7037, 7038, 7040, 7042, 9002
Other colours on request.
Appearance
Slip resistant gloss finish
System Details
System Structure
| 1. Primer | Sikafloor®-80 EpoCem® Primer |
| 2. Levelling screed + broadcast in excess | Sikafloor®-81 EpoCem® New HC + broadcast quartz sand, 0.3–0.9 mm (Sikadur® 501) |
| 3. Top coat | Sikafloor®-264 HC |
Composition
EpoxyNominal Thickness
~ 2–4mm
Shelf Life
Please refer to the individual Product Data Sheet
Storage Conditions
Please refer to the individual Product Data Sheet
Compressive Strength
| 60 N/mm2 ( 28 days at 23 °C / 50 % R.H.) | (EN 13892-2) |
Tensile Adhesion Strength
| > 1.5 N/mm2 (failure in concrete) | (ISO 4624) |
Chemical Resistance
Refer to chemical resistance of Sikafloor®-264 HC
Application
Product Temperature
Please refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min / +30 °C maxRelative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor temperature must be at least 3 °C above the dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
Can be applied on green or damp concrete, without any standing water.
Although the system can be applied onto green concrete surfaces (> 24 hours), it is advised to allow at least 3 days for early shrinkage of concrete to occur in order to prevent concrete shrinkage cracks from appearing on the screed surface.
Waiting Time / Overcoating
Before applying Sikafloor®-80 EpoCem® Primer on Sikafloor®-80 EpoCem® Primer allow:
| Substrate Temperature | Minimum | Maximum |
| +20°C | 3 hours | 16 hours |
| +30°C | 2 hours | 5 hours |
Before applying Sikafloor®-81 EpoCem® New HC on Sikafloor®-80 EpoCem® Primer allow:
| Substrate Temperature | Minimum | Maximum |
| +20 °C | 3 hours | 3 days |
| +30 °C | 2 hours | 1 day |
Sikafloor®-81 EpoCem® New HC can be overcoated with vapour tight coatings when the surface humidity falls below 4%!
Not earlier than :
| Substrate Temperature | Waiting Time |
| +20°C | 1 day |
| +30°C | 1 day |
Applied Product Ready for Use
| Temperature | Foot Traffic | Light Traffic | Full Cure |
| +20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
| +30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Note: Times are approximate and will be affected by changing ambient conditions.
Consumption
| Coating System | Product | Consumption |
| 1. Primer | 2 x Sikafloor®-80 EpoCem® Primer | ~ 0.3–0.5 kg/m2 |
| 2.Levelling screed | Sikafloor®-81 EpoCem® New HC | ~2.25 kg/m2/mm ~4.5 kg/ m2 for a 2 mm thick application (minimum for T.M.B) |
| Broadcasting in excess | Quartz Sand, 0.3–0.9 mm (Sikadur® 501) | ~ 4–6 kg/m2 |
| Top coat | 1–2 x Sikafloor®-264 HC | ~ 0.6–0.8 kg/m2 |
CLEANING
Refer to the Method Statement Sikafloor®-Cleaning Regime