Product Data Sheet
Show all documents

Sika MonoTop®-711 MY

High performance, one part, cementitious polymer modified finish skimcoat

Sika MonoTop®-711 MY is a high performance, one part, cementitious polymer modified based filling and levelling plasters for concrete surfaces. Sika MonoTop®-711 MY consists of finely crushed high quality limestone. Sika MonoTop®-711 MY is used as a surfacing mortar, an essential surface preparation phase to obtain superfine finish coating and painting application.

  • Provide very fine surface finish on walls, ceilings, etc.
  • Great durability and flexibility
  • Quick drying and easy to apply
  • Thickness of the plaster can be varied to minimise wastage
  • Non-cracking when applied at correct thickness and properly cured
  • Easy to mix – just add water
  • Good adhesion
  • Can be applied by spraying
Enquire about this product
Product Data Sheet
Show all documents

Usage

  • Level uneven substrates such as concrete, aerated concrete, hollow block walls, light-weight blocks, etc.
  • Filling compound to level off irregularities and fill blow holes and fine honeycomb.
  • Suitable for both internal and external use.
 

Advantages

  • Provide very fine surface finish on walls, ceilings, etc.
  • Great durability and flexibility
  • Quick drying and easy to apply
  • Thickness of the plaster can be varied to minimise wastage
  • Non-cracking when applied at correct thickness and properly cured
  • Easy to mix – just add water
  • Good adhesion
  • Can be applied by spraying

Packaging

25 kg bag

Colour

Grey powder

Product Details

Product Information

Shelf Life

6 months from the date of production

Storage Conditions

Store properly in original, unopened and undamaged sealed packaging in dry conditions. Protect from direct sunlight, rain, water and moisture.
Technical Information

Tensile Adhesion Strength

~1.4 N/mm²

(EN 1542)

Layer thickness ~1 mm

Application

Application Information

Mixing Ratio

8.0–8.75 L of water / 25 kg bag (Workable consistency)

Layer Thickness

0.4 mm min. / 2 mm max.

Pot Life

~2 hours (at 25 °C)
Consumption

Consumption

~1.35 kg/m² of powder for each mm of thickness
Application steps

MIXING

Sika MonoTop®-711 MY must be mixed with clean water using a power drill whisk. Pour the required water into a suitable container, then add Sika MonoTop®-711 MY while stirring continuously until a smooth consistency is achieved. Scrape the sides of the container to ensure all the powder are mixed to a homogenous consistency. Allow the mixture to stand for 2 to 3 minutes. Mix again for 15 to 30 seconds, the plaster is now ready for use.

 

APPLICATION

Sika MonoTop®-711 MY is applied either by hand with a steel trowel and spatula, or by a suitable spraying unit. The surface is then levelled off to a smooth finish with a steel trowel. Ensure that the applied coat is dry before application of subsequent coats.

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use. Hardened or cured material can only be removed mechanically.

Documents