Product Data Sheet
Show all documents

Davco® Grout Admix Plus RL 1000

High bonding strength latex additive for grouting tile joints

Davco® Grout Admix Plus RL 1000 is exclusively formulated for use in conjunction with Davco’s range of cement-based grout (sanded/un-sanded) in replacement of water to grout the joint of ceramic tiles, pavers, brick, marble and stones.

  • Reduce staining and efflorescence
  • Excellent water and impact resistance
  • Increased flexibility of the grouting system
  • Interior and exterior application
Product Data Sheet
Show all documents

Usage

  • Filling up joints in between tiles and stones to interior and exterior applications
 
  • Grouting tiles installation subject to limited movement, e.g. sheets & boards
  • Grouting to wet areas
  • Re-grouting on joints

Advantages

  • Reduce staining and efflorescence
  • Excellent water and impact resistance
  • Increased flexibility of the grouting system
  • Interior and exterior application

Packaging

  • 1 L bottle
  • 4 L bottle
  • 20 L drum

Colour

Milky white liquid

Product Details

Product Information

Shelf life

12 months from date of production

Storage conditions

Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight.
Technical Information

Mortar mix design

Davco® Grout Admix Plus RL 1000

Sanded grout

Un-sanded grout

1 L

~5 kg

~3 kg

The amount of sanded/un-sanded grouts are estimates and should be adjusted to meet the user's consistency requirements.

Application

Application Information

Ambient air temperature

5 °C min. / 45 °C max.

Substrate temperature

5 °C min. / 45 °C max.
Application steps

MIXING

  • Shake the container well prior to usage.
  • Add Davco® Grout Admix Plus RL 1000 into a clean mixing container. Then, add Davco’s range of cement-based grout (sanded/un-sanded). For best result, use Davcogrout.
 
  • Mix continuously in a circular motion by hand or using a low-speed mechanical mixer until a lump-free, creamy consistency and uniform paste is achieved.

CLEANING OF EQUIPMENT

Tools and equipment can be cleaned with water while the grout is still wet. Hardened material can only be removed mechanically.

Documents

FAQ

Can I mix tile grout with latex? Which latex should I use?

Yes, most cementitious tile grouts can be mixed with latex.

Sika's product: