Product Data Sheet
Show all documents

SikaWall®-160 Plaster

High performance cementitious coarse render

SikaWall®-160 Plaster is a durable, high quality cementitious prepacked mortar specially formulated for plastering work on concrete surfaces, brickwalls and blockwalls, both internally and externally.

  • Provides good bond strength to the substrates
  • Greater durability and flexibility
  • Convenient in handling, mixing and application
  • Thickness of the plaster can be varied to minimise wastage
  • Non-combustible
  • Non-cracking when applied at correct thickness and properly cured
Find a store
Product Data Sheet
Show all documents

Usage

SikaWall®-160 Plaster is designed for plastering on concrete surfaces, brickwall, blockwall and lightweight autoclaved aerated blocks. It is recommended for use as joint mortar for brickworks, blockworks and bedding to receiving wall tiles. It is suitable for internal and external applications.  

Advantages

  • Provides good bond strength to the substrates
  • Greater durability and flexibility
  • Convenient in handling, mixing and application
  • Thickness of the plaster can be varied to minimise wastage
  • Non-combustible
  • Non-cracking when applied at correct thickness and properly cured

Packaging

  • 25 kg bag
  • 40 kg bag

Colour

Grey powder

Product Details

Product Information

Shelf Life

6 months from the date of production

Storage Conditions

Store properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Protect from direct sunlight, rain and water.

Maximum Grain Size

4.5 mm
Technical Information

Tensile Adhesion Strength

≥ 0.5 N/mm²

(EN 1015-12)

Application

Application Information

Mixing Ratio

Packaging

Water consumption per bag

25 kg

3.4–4.0 L

40 kg

6.4–6.6 L

Fresh Mortar Density

1.7–1.8 kg/l

Layer Thickness

5–15 mm per layer of application
Consumption

Consumption

1.4–1.5 kg/m²/mm

* Dry powder * This may only serve as a guideline. It is highly recommended to carry-out trials on site to determine the actual coverage.
Application steps

MIXING

Add clean water to SikaWall®-160 Plaster and mix thoroughly using a hand-held or mechanical mixer for 3–5 minutes until a homogenous lump-free paste is achieved. Allow mixture to stand for a few minutes for additives to dissolve and mix is ready for use.

 

APPLICATION

Apply SikaWall®-160 Plaster onto moist, clean substrate using a wooden/steel float or steel trowel while the mix is still workable. It can be applied at a recommended thickness of 5–15 mm per layer of application and up to a total build-up thickness of 30 mm. Ensure that each layer has hardened before applying the subsequent layer.

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use. Hardened and/or cured material can only be removed mechanically.

Documents

FAQ

What are plasters?

Plasters are coarse mortar, applied onto concrete, brick and block walls to a thickness more than 5 mm to create a level surface. They are also used as a base layer before skim coat.

Sika’s Product: